DECKED Toyota Tacoma 2005-2018 5'1" Bed Length

This DECKED truck bed organizer fits a Toyota Tacoma pickup truck with a bed length of 5'1" manufactured from 2005 to 2018. 

All DECKED Drawer Systems come standard with the following accessories included at no extra charge: (1) D-Box Desert Tan, (1) Crossbox Desert Tan, (1) DRAWERGANIZER™, Set of (2) Wide Drawer Dividers (Narrow Drawer Dividers can be purchased separately). Additional accessories ship for a flat $25 rate, so order up on additional accessories with your Drawer System order! Check out our full accessory line HERE. 

NOTE: This vehicle requires drilling holes in the truck bed for installation. For more information, check out the instructions HERE.

NOTE: Because the short midsize DECKED system is 56", there will be about 3.9" of empty space between the tailgate end of the DECKED system and the tailgate. DECKED drawers require 4" to be opened, but the first 5 1/2" of the drawer are taken up by the handle cavity and drawer taper. So, it is nearly impossible to remove anything from the drawers with the tailgate closed.

NOTE: Drawers are full bed-length drawers, but do not fully extend. Max midsize short drawer extension: 36” for reasons related to physics.
LINERS: Works with spray-in bed liner, but NOT a drop-in plastic bed liner.
BEDRUG: Works with BedRug mat, but NOT with a BedRug full liner.
3-YEAR WARRANTY: We offer a 3-year limited warranty on all DECKED products. Warranty in detail HERE.
SHIPPING POLICY: Shipping of a DECKED Drawer System anywhere in the contiguous U.S. is FREE. Shipping takes 7-14 days. Shipping Policy HERE. 

Please visit the FAQ page for more answers to those tough questions! 

NOTE: Access to the outlet and both storage compartments will be compromised, but hey, life ain't always fair, right?!. You can remove the storage compartment doors for limited access. NOTE: you must do this before you install the DECKED system.The power outlet can still be used if you insert a flat head pigtail extension cord BEFORE you install the deck panels. Make sure to have the outlet capped to keep water out. A low profile pigtail will work. You can install a weatherproof cover over female end of the pigtail when not in use.

The Details

WEIGHT CAPACITIES:

2000 lb payload evenly distributed
200 lb payload per drawer

SYSTEM DIMENSIONS:

TOTAL WEIGHT: ~205 lbs
LENGTH: 56"
WIDTH: 56"-64"
HEIGHT: 12"
SHIPPING DIMS: 235 lbs, 68"x 39" x 23"

NARROW DRAWER DIMENSIONS:

LENGTH (top of drawer):  53”
LENGTH (bottom of drawer): 47.3”
WIDTH (top of drawer): 11”
WIDTH (bottom of drawer): 9.75”
HEIGHT: 8.5”
EXTENSION (each): 36"

WIDE DRAWER DIMENSIONS:

LENGTH (top of drawer):  53”
LENGTH (bottom of drawer): 47.3”
WIDTH (top of drawer): 18”
WIDTH (bottom of drawer): 16.75”
HEIGHT: 8.5”
EXTENSION (each): 36"

More detailed technical specs HERE.

Built from 100% recycled HDPE (High Density Polyethylene) in-molded to a galvanized recycled steel subframe.

DECKED 101 VIDEO:

The Install

Assembly requires basic hand tools. Please follow our written instructions as well as step-by-step video tutorials:

RETURN POLICY:

Returns to DECKED must be made within 30 days of receiving the shipment and are subject to a 20% restocking fee in addition to return shipping costs (LTL Freight can be expensive). DECKED accessories must be in the original packaging. DECKED system returns cannot be partially or fully assembled, and must be in the original packaging. Call DECKED customer service for additional questions regarding returns and for return authorization at 208-806-0251. Systems purchased from a DECKED reseller should be returned to, and are subject to, the return policy of that reseller.