Bumper arrived within a few days and included all the hardware you need. Get familiar with the instructions before you start to save time. Definitely a half day of work from start to finish but worth it. Very happy with the quality and best part is this bumper doesn't mess up your sensors! Seamless install. I haven't purchased a light bar and winch yet but plan to add in the future!
This dash mount fits extremely well and is very low profile. Install was fairly simple just a bit time consuming.
Disclaimer - I don't have this bumper or a LC. But I just wanted to tell you guys you really hit the design outta the park on this one. Keeping most of the factory front bumper and integrating all the factory components is great. When I buy my LC used in about 6 years and give the GX470 to my son. I will be buying one of these. Nice work!
Purchased this roof rack to replace the factory rack so I could hang a large 270 awning from it. It installed fairly easily and was able to do the entire thing myself although if you have a 2nd person to help get it up on the roof it would be VERY beneficial. I used blankets and barriers to protect the car while putting it up. I found that with the t-nuts inside the tracks, using a zip tie made it much easier to slide the nut into position and also pushing the zip tie under the nut forces it it square up with the top surface so its much easier to get the bolt started without cross threading.
All in all, VERY pleased witht he product and the company in general. I'll check them out for other products as needs arise.
Best purchase I've made for my Tundra to date!
Arrived quick from the manufacturer!
Easy install and great product, fit perfectly in the Rago bumper!
Fit is perfect, little daunting doing that much cutting on a brand new car but instructions were spot on and everything fit perfectly on the first cut! Paired with winch and kc lights it’s the perfect combo!
Quick shipping, great product with everything you need to install.
This is an excellent mount. It looks good and is solid. It is easy to install. The problem is that the powder coating is so good that it is difficult to get a good bonding connection with the truck body. It is great that the mounting screws are now stainless unlike the first gen that was black coated screws. Remember that the truck body is half of the antenna and you need to have a good electrical connection with the truck body. In addition, Toyota pained all the parts then assembled the truck body so some panels are not well electrically bonded to each other. The panel that the mount is attached to is probably good enough for 70cm/2m comm but not good enough for HF. To overcome this, I ran a 6ga grounding wire attached from one of the mount screws in the light well and ran it forward-down under the truck and attacked it to the frame under the cab. BTW the main ground 1.5" strap is on the right side of the engine to the frame. I also added a ground strap under the cab to under the bed of the truck. You will need to grind off some paint to get a good connection to the frame and re pain once bonded. Now that you have improved the truck ground, you need to work on the mount ground to the Rago bracket. You can do this two ways. You can ground off the powder coat under the antenna mount hole and around the bracket to truck holes on the mound. You should also remove some paint around the hole you drilled into the truck panel for the mount. Usle a multimeter to check electrical connectivity. This set up allows you to connect a PL259 right to the antenna at the bracket feedpoint. The second option is not to use the bracket as part of the antenna system. Instead run your coax into the light well. Connect the shield only to the bracket screw (that has the previously mentioned 6ga ground wire) and run just the center conductor out to the antenna mount hole. Use a simple screw (usually 3/8X24) to attached the antenna to the mount. Obs you will need to use plastic (non conductive) washers to make sure that the antenna is electrically isolated from the mount. This is how you get your SWR <1.5. If I was going to make this mount better, I would not powder coat under the antenna mounting hole and screw holes, or offer a stainless (unpainted) version. I would include star washers for between the bracked and the truck body (these will bite through the pain for a better electrical connection). This is overall the best Tundra mount on the market. Thanks Rago
Great product very good easy to install .
A little tough to install with the wireless charging pad in the way but overall it works perfectly and fits great. Exactly as described
Great build quality- I added blue loctite to mounting brackets that didnt need the locking nuts as extra precaution due to vibrations.
One of the best external molle Panel i the market! Easy to install.
I recently upgraded my rear bumper, after a tedious search for a rear bumper (a month of searching) i came across "Rago Fabrication" . What made them stand out to the rest was that their rear bumper allowed me to use my sensor that came with the truck. Their quality and workmanship was spot on. Love the new Rago rear bumpe .
I installed the side molle panels and the molle shelf. I was a bit scared to drill the holes for the side panels but it went well. The shelf was an easy install. Now my coolers and slides fit under my molle shelf.
Good fitment, easy install, solid armor. Didn't interfere with my rock sliders.
With my group 31 battery and the rago battery tray, it made the world of difference once installed. Rago FTW
Great product & Easy installation usb power on the dash is perfect
It looks great and fits flush. It also feels really sturdy like it could handle a decent amount of weight hanging on it.
Excellent quality, great price. Quality hardware but would prefer non hex bolts.
Bright lights in a compact package, perfect for ditch lights. Add colored bezels and amber lens and they are perfect in both spot and flood combo configuration. The backlighting is a nice touch as well.
Very nice design that complements the vehicle. Can’t hardly tell they are there unless you have lights installed.
I am a new user of Molle Panels and I took my time to research which brand would give me the most Bang for my Bucks as far as quality and price. I decided to go with Rago and cant be any happier. The quality is superb. I would only recommend that each panel be labeled with a L or a R to quickly determine which side it goes on. I will keep recommending your panels to anyone who asks. Looking forward to buying a Roof Rack next. Thanks for your quality of craftsmanship.
Love the look of this bumper, I wish you made option fill in/ bolt on plate to cover winch spot,
